Forney Easy Weld 140 FC-i Mig Welder Review

Choosing the Best Mig Welder

Mig Welder Cart provides industry expertise and research to its readers. You help us by using the links to our carefully picked product. We may earn a little commission when you buy from a link at no extra cost.

 

Forney Easy Weld 140 MP

Welding with wire feed is possible with the 140 FC-i. However, since it lacks gas line support, you won’t be able to conduct any accurate MIG welding. As a result, you can only do welding using flux-cored wire.

On the other hand, it is a relatively low-priced machine that is marketed for those who are just starting, do-it-yourselfers, and those who do light fabrication. As a result, Forney produced a high-quality welder at a price point that was more appealing to consumers by achieving a balance between the number and kind of features included in the product.

The equipment performs well and provides better control over the arc than most of the cheaper welders. It can be carried easily and has a sturdy construction. Bear in mind that it is not intended for particularly strenuous labor, yet despite this, it is more long-lasting than you may think it would be.

Forney Easy Weld 140 FC-i Mig Welder – Reviews & Buying Info

Forney Easy Weld 140 MP

INCLUDED

  • Forney 140 FC-i
  • 8 ft. MIG gun
  • 8 ft. ground clamp
  • 20A to 15A adapter
  • An additional contact tip
  • User manual

Specifications of the Welder

  • 16.75 x 8.125 x 12 (304.8 millimeters) (304.8 millimeters)
  • 19-pound gasless/flux-core welder.
  • Portable
  • 120V input/140A output, unlimited voltage/wire feed speed control.
  • 1/4-in (6.35 millimeters)
  • Wire.030″ or 0.35″
  • 20A – 15A adapter, 8′ MIG gun, 8′ ground clamp
  • 30A Duty

Forney Easy Weld 140 FC-i Mig Welder MIG Welder Overall

Forney Easy Weld 140 MP
5/5

Forney Easy Weld 261, 140 FC-i Welder, 120V

  • MIG employs 0.30 flux-core wire.
  • Both the voltage and the speed of the weld are uncapped.
  • One hundred forty amps weld 1/4-inch mild steel.
  • DIY, repair, metal manufacturers and hobbyists may all benefit from this 19-pound portable welder.
  • Metal body.
  • Wire coils weighing 2 and 10 pounds
  • MIG gun, ground clamp, handle, and 20A-15A adaptor are included in the package.
  • 19.75×8.125×16, gasless/flux-core alone
  • Portable, Easy to carry
  • A wire-feed torch that operates on 120V and 140A.
  • Welds up to 1/4 inch (6.35 mm),.030 or 0.35-inch wire, 8-foot MIG gun, 8-foot ground clamp, 20 amp to 15 amp adaptor, 30% duty cycle at 90 amps.
  • Flux Core MIG Wire (42300 and 42301), Anti-Spatter Spray (37030), Nozzle Gel (85336, 85337) (60170, 60171, and 60172).
  • Warranty for one year
 

Welding joins two materials using heat and pressure. As the material cools, it enters. This method joins metals, thermoplastics, and wood. Welding equipment directs heat to the junction site. Over time, these devices have gotten more compact and practical, used in domestic repairs and DIY tasks.

In 1932, Forney began making power tools. The firm has been known for the quality of its welding equipment and accessories for 80 years. The Forney Easy Weld 140 FC-i is a flux-core welder for novices.
This method works nicely outdoors without shielding gas. It’s also used to restore damaged and filthy materials since it makes excellent welds.

Pros

  • Simple in both its installation and ongoing operation
  • A design that is both lightweight and small, allowing for enhanced portability.
  • Control over the wire feed’s speed and voltage may be adjusted indefinitely for more accurate settings.
  • Have the ability to be connected to standard electrical sockets
  • Welding without using gas makes the welding process more accessible and less cumbersome.
  • Prices that are not prohibitively expensive
  • One year of warranty from the manufacturer, friendly and professional customer service, and ongoing support

Cons

  • Exclusive compatibility with Forney’s many accessory options
  • To do flux core welding, extra cleaning and equipment are required.
  • Regarding particular applications, the wire feed speed is rather sluggish.
  • The final weld quality is low, mainly when using 0.035-inch wire.

 

Overview

Forney Easy Weld 140 FC-i Mig Welder MIG Welder generally has a design that makes it appropriate for hobbyists, trainees, and people engaged in beginner-level production or maintenance tasks.

This welder may be used in areas such as your garage that do not have access to 240V outlets since it takes input at 120V rather than the higher voltage required by 240V. In addition, a conventional circuit breaker with a rating of 20A amperes will operate well.

The MIG welding, DC TIG welding, stick welding, and flux-core welding processes are all within the capabilities of the 140 MP. These procedures primarily concentrate on MIG and flux and are carried out satisfactorily. In addition, it features a lift TIG start, preferable to the scratch start TIG that is sometimes found on machines that include it, to make the machine’s specifications appear more impressive on a spec sheet.

It can be moved about easily and has several advanced features, such as an endless adjustment knob set and a full metal wire feed. Additionally, it is portable. In addition to that, it has some of these more sophisticated qualities. In addition, the prices are fair for what is being offered. However, some machines work harder than others to attain a quality-to-price ratio that is superior to that of their competitors.

Mehedi Hasan

M Hasan

I’m a professional welder and a writer at heart, so I wanted to share the welding expertise I’ve gathered over the years. In addition, I hope our posts motivate others to start welding. I have well-researched. I promise you’ll find honest advice on choosing the best MIG welder here- www.migweldercart.com

Recent Articles